A skirting board is a necessary component of every house. They create a smooth transition between the walls and floors while acting as a decorative feature. Everyone loves the product but no one really talks about the struggle behind installing it. That too within a budget. That’s what this article will do.
No, you don’t have to give up your dream skirting board. These skirting board installation cost based solutions will help you renovate your house more quickly and affordably.
Table of Contents
Material
Choosing the appropriate material is the first step in picking skirting boards that fit your budget. MDF is frequently the least expensive choice without sacrificing strength or durability. Additionally, it is simple to use, which facilitates a speedier and easier installation process. Avoid using inferior materials or pre-primed skirting boards since they can eventually warp or bow, appear cheap, and require more paint coats to hide the wood grain.
Prepare the Wall
It is important to prepare the wall and skirting board before to installing them. Sanding the area before installing the skirting board improves adherence and guarantees that the paint will go on evenly and smoothly. Before installing the walls, it is also crucial to make sure they are level. To avoid an uneven installation, use a spirit level to find any irregularities and make the necessary corrections.
Measurement
To guarantee a smooth and polished finish, the skirting board must be measured and cut precisely. Whenever you cut a board, you should always measure the length of the wall first and consider the longest run. Always cut the moulding at a 45-degree angle when creating a mitre junction. A mitre box is a readily available tool that aids with saw guidance. Before putting in, double-check the dimensions once again. If you make a mistake it will cost you double the money and work.
The Fitting
It’s now time to attach the skirting board to the wall using nails and glue. To get a smooth appearance, adhere the skirting board to the wall using wood adhesive. The nails should then be driven in so they are hidden below the surface. For the skirting board to be securely fastened, it is best to hammer every 20 centimetres. Use a mitre joint to link the two boards for corners. Applying glue to both parts will provide a firm grip when employing a mitre junction. Use temporary screws to secure the boards together for increased stability.
Finishing
After using wood filler to close any gaps sand down any sharp edges then apply paint to the skirting boards to get the desired pattern. Select a paint that is water-based since it has a minimal smell, dries rapidly, and is easy to clean up. A roller should be used for larger areas while painting and a tiny brush for more detailed work. A sturdy, long-lasting finish may typically be achieved with just two applications on skirting boards.
In conclusion, installing skirting boards under budget to your property may make it appealing. You can achieve an expert finish within a reasonable skirting board installation cost.
